TR626EM Trommel Screen
- Machine built to minimize jobsite disturbance
- Complete control allows for increased efficiency when it matters most
- Spend less time on maintenance and more time being productive
General
| Manufacturer | Vermeer |
| Model | TR626EM Trommel Screen |
| Category | Landscape, Recycling |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Weight | 65000lbs (29483.5kg) |
| Hitch Weight | 30000lbs (13607.8kg) |
| Transport Length | 54.5ft (16.6m) |
| Transport Width | 113in (287cm) |
| Transport Height | 13.5ft (4.1m) |
| Operation Length | 84.4ft (25.7m) |
| Operation Width | 113in (287cm) |
| Operation Height | 15.9ft (4.8m) |
| Capacity | Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40% |
Motor Option One
| Make and Model | Siemens |
| Motor rating | 150 hp, 1800 rpm, 460 V, 3 phase |
| System Voltage | 460 V |
Hydraulic System
| Operation | 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) |
| Tank capacity | 200gal (757.1L) |
Chassis
| Frame Description | 4 independent hydraulic jacklegs |
| Axle/Suspension | Leaf spring |
| Capacity | 22500lbs (10205.8kg) |
| Tires - Option One | 235-75R 17.5H qty. 4 |
Hopper and Apron Conveyor
| Hopper Capacity | 6cu yd (4.6cu m) |
| Hopper Bottom Width | 48in (121.9cm) |
| Apron Conveyor Speed | 0-35 fpm (0-10.7 m/min) |
| Apron Opening Height | 34in (86.4cm) |
| Apron Opening Width | 43in (109.2cm) |
| Hopper Height | 9.5 ft (2.9 m) from ground level at operating incline |
| Hopper Opening | 13.2 ft x 5.3 ft (4 m x 1.6 m) |
| Apron Conveyor Length | 16ft (4.9m) |
| Apron Conveyor Belt Width | 48in (121.9cm) |
| Apron Conveyor Rollers | 4 in (10.2 cm) diameter qty. 14 |
Screen Drum
| Drum Operation | 0-42.6 gpm (161.3 L/min) |
| Drum Motor | 48.8 cu in (800 cu cm) displacement |
| Drum Diameter | 6ft (1.8m) |
| Drum Support Description | Four steel trunnion rollers 8 in (20.3 cm) diameter, 4 in (10.2 cm) width |
| Drum Length | 26ft (7.9m) |
| Thrust Bearing Diameter | 5in (12.7cm) |
| Thrust Bearing Face | 2.9in (7.4cm) |
| Drum Speed | 0-24 rpm |
| Drum Drive Chain | 140 WT |
| Drum Angle Adjustability | 0-7 degrees |
| Maximum Screen Panels | 8 |
Screen Brushes
| Brush Diameter | 14in (35.6cm) |
| Bristle Material | Polyethylene |
| Brush Assembly Support | Two 1.25-in (3.2-cm) sealed ball bearings |
Collecting Conveyor
| Conveyor Motor Displacement | 38.4cu-in (629.3cu-cm) |
| Maximum Fines Belt Speed | 405ft/min (123.4m/min) |
| Conveyor Belt Width | 36in (91.4cm) |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Head/Tail Pulley Type | Rubber-lagged, 12 in (30.5 cm ) diameter, 38 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Rubber Flashing | Adjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm) |
| Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers |
| Tail Pulley Takeup | 12in (30.5cm) |
| Self-Cleaning Return Idlers | 6, each 4 in (10.2 cm) diameter |
| Fines Conveyor Frame | Part of trailer frame |
Fines Conveyor
| Conveyor Motor Displacement | 38.4cu-in (629.3cu-cm) |
| Fines Conveyor Length | 72.5ft (22.1m) |
| Maximum Fines Belt Speed | 405ft/min (123.4m/min) |
| Conveyor Belt Width | 36in (91.4cm) |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 16.6 ft (5.1 m) with drum at 4 deg |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 38 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Rubber Flashing | Adjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm) |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 38 in (96.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Tail Pulley Takeup | 12in (30.5cm) |
| Self-Cleaning Return Idlers | 11, each 4 in (10.2 cm) diameter |
| Fines Conveyor Frame | 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing |
Fines Conveyor Option-Radial
| Conveyor Motor Displacement | 21.4cu-in (350.7cu-cm) |
| Fines Conveyor Length | 30.5ft (9.3m) |
| Maximum Fines Belt Speed | 705ft/min (214.9m/min) |
| Conveyor Belt Type | 150 lb (99.8 kg), 2-ply, 1/32 in x 1/32 in (0.8 mm x 0.8 mm), vulcanized |
| Head/Tail Pulley Type | Rubber lagged, crowned, 9.75 in (24.8 cm) diameter, 32 in (81.3 cm) wide |
| Head Pulley Bearing | 1.94 in (4.9 cm) pillow block |
| Idler Type | 30 degrees CEMA "B" with permanently sealed bearings spaced at 41 in (104 cm) centers |
| Self-Cleaning Return Idlers | 4, each 4 in (10.2 cm) diameter |
| Fines Conveyor Frame | 2 in x 8 in (5.1 cm x 20.3 cm) structural steel building |
Overs Conveyor - Option 1
| Overs Conveyor Length | 20ft (6.1m) |
| Maximum Variable Overs Belt Speed | 290ft/min (88.4m/min) |
| Conveyor Belt Size | 48 in (121.9 cm) wide with raised cleat |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 3 ft (0.9 m) x 10 ft (3.1 m) |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Tail Pulley Takeup | 12in (30.5cm) |
| Solid Return Idler Size | 4-in diameter |
| Overs Conveyor Frame | 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing |
Overs Conveyor - Option 2
| Overs Conveyor Length | 28ft (8.5m) |
| Maximum Variable Overs Belt Speed | 290ft/min (88.4m/min) |
| Conveyor Belt Size | 48 in (121.9 cm) wide with raised cleat |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 3 ft (0.9 m) x 12.5 ft (3.8 m) |
| Head Pulley Type | Rubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide |
| Head Pulley Bearing | 2.4 in (6.1 cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft |
| Head Pulley Takeup | 10in (25.4cm) |
| Rubber disc return idler size | 4 in diameter |
| Rattler roller return idler size | 5.4 in diameter |
| Overs Conveyor Frame | 2 in x 8 in (5.1 cm x 20.3 cm) structural steel tubing |